Why the joints matter as much as the surface
On conventional sand-jointed block paving, the narrow joints are part of how the paved surface works. Jointing sand helps the blocks resist movement together. It is not just there to hide the gaps. Some material can be lost through weathering, sweeping, weed removal and cleaning, so a driveway that looks brighter afterwards may still need attention between the blocks.
Re-sanding generally means brushing suitable jointing sand into those joints after cleaning, once conditions are right. It does not mean spreading ordinary building sand over every kind of paving. Permeable paving and surfaces with specialist jointing materials can have different requirements. Before any work starts, establish what you have rather than assuming that every block driveway needs the same finishing treatment.
A useful starting point is to look at the driveway as a complete surface. Are the blocks sitting evenly? Are the edges secure? Does rain drain away normally? Those observations help separate an ordinary cleaning job from a paving problem that cleaning cannot resolve.
- ✓Look for visibly empty joints or loose material.
- ✓Note rocking blocks, sunken patches and spreading edges.
- ✓Mention any previous sealant or specialist jointing product.
Work out whether dirt or damage is the main problem
Green growth, leaf residue and general surface dirt can make sound paving look neglected. Cleaning may improve its appearance and remove slippery growth, but it will not correct a failed base, lift a sunken area or repair a broken drainage channel. If puddles keep returning to the same hollow, that is worth discussing before deciding what cleaning should achieve.
Stains also deserve a realistic conversation. Oil, rust and ingrained marks do not all behave like ordinary dirt. Their age, the paving material and previous treatments can affect the result. Point out any marks that particularly bother you, rather than assuming they will disappear as part of a general wash.
Take a slow walk around the driveway from ground level and make a short list of concerns. There is no need to lift blocks or dig into joints. Clear photographs of the overall area and any damaged spots can help explain what you want assessed when requesting a written quote.
Pressure washing
- Driveways, patios and paths
- Method matched to the surface
- Free written quotes
Choose a cleaning approach that suits the paving
Pressure washing can be useful for block paving, but suitable equipment and a controlled approach matter. Excessive pressure or an unsuitable technique can disturb joints and damage some surfaces. The aim is to remove unwanted material without treating the driveway as though every patch needs the strongest possible jet.
A sensible discussion covers the condition of the blocks, the existing jointing material and where the dirty water will go. Nearby walls, doors, planting and neighbouring property also need consideration. If you are comparing options, the pressure washing page explains the service; this guide focuses on the decisions around your particular driveway.
Be cautious about tackling a test patch in the most visible part of the drive. An uneven DIY attempt can leave obvious differences between cleaned and uncleaned sections. If the paving has a coating, unusual finish or uncertain history, raise that before work begins so the proposed method can take it into account.
Understand what re-sanding involves
For suitable conventional block paving, re-sanding usually follows cleaning rather than happening at the same time as the wash. The surface and joints need to be sufficiently dry for the specified sand to move into the gaps properly. Sand brushed across damp paving can clump or stick on top instead of settling where it is needed.
The appropriate material is worked across the paving and into the joints. Depending on the paving system and its condition, further preparation or suitable compaction may be part of the process. This is why a quick scatter of sand is not necessarily the same as completing the jointing correctly.
Ask what material is proposed and how the person doing the work will judge that the joints are ready. Cleanforce NI's driveway cleaning should not be taken to include re-sanding automatically. Ask when requesting a quote whether it forms part of the proposed work, can be arranged, or needs a separate paving contractor.
- ✓Confirm that the jointing material suits your paving.
- ✓Ask who is responsible for the re-sanding stage.
- ✓Check whether a separate visit or contractor may be needed.
- ✓Request clear advice about using the driveway afterwards.
Allow for weather, drainage and everyday access
Cleaning and re-sanding have different weather considerations. A driveway may be suitable for washing when it is not ready for dry jointing sand. Shade, damp joints and further rain can affect the next stage, so it helps to discuss the sequence rather than expecting every task to fit neatly into one visit.
Think about how your household uses the driveway. Vehicles may need moving, bins may need another route and someone may need a clear path to the front door. Mention shared access, limited parking or a garage that must remain accessible. Agreeing those practical details beforehand is easier than changing the arrangement once equipment is in place.
Drainage should remain part of the conversation throughout. Leaves and loose debris should not simply be pushed into a channel and forgotten. If water already pools or flows towards the house, mention it before cleaning. A wash may reveal the paving more clearly, but it is not a substitute for correcting an underlying drainage fault.
Keep the paving tidy without disturbing the joints
Once the work is complete, ask for aftercare suited to the paving and any materials used. Avoid assuming that a general tip from a neighbour applies to a different jointing system. Advice about sweeping, driving over the surface or applying another product should relate to what has actually been done.
Routine care can stay straightforward. Clear fallen leaves before they turn into a damp layer, keep drainage channels free of obvious debris and deal with small weeds before they become established. Aggressively scraping out every joint can remove useful material along with unwanted growth, leaving another problem to put right.
Sealing is a separate decision, not an automatic requirement after every clean. It can change appearance and future maintenance, and suitability depends on the paving and product. If you are considering it, ask about preparation, drying conditions and compatibility rather than choosing a coating simply because the newly cleaned blocks look ready for one.
Ask for a quote that separates the different tasks
A useful quote makes the scope understandable. Explain whether your priority is slippery growth, general appearance, weeds, staining or concerns about the joints. Ask which tasks are included and which require another arrangement. Cleaning, repairs, re-sanding and sealing are different jobs, even when homeowners discuss them together.
Cleanforce NI Ltd offers free written quotes and is based at 31 Brookmount Road, Omagh BT78 5HZ. Its coverage includes Tyrone and Fermanagh, including Omagh, Enniskillen, Cookstown, Dungannon, Strabane and villages, plus Belfast from the Omagh base. Check the areas we cover and mention any access restrictions with your enquiry.
You can reach Cleanforce NI on 07814 733 959, Monday to Saturday, 9am–6pm. Use the contact page to describe the driveway, highlight damaged sections and ask specifically about re-sanding. That gives you a clearer basis for deciding what to arrange, without confusing a surface clean with a complete paving refurbishment.
Want a professional to handle it?
Frequently asked questions
Does every block paving driveway need re-sanding after cleaning?
Not necessarily in the same way. The answer depends on the paving system, its existing joints and how much material has been lost. Conventional sand-jointed paving should be checked after cleaning. Permeable paving and specialist jointing systems need materials and methods suited to their design.
Can I put new sand over weeds and moss?
Covering unwanted growth does not prepare the joints properly. The existing condition needs assessing and suitable preparation comes first. Otherwise, new material may sit above debris rather than filling the joints as intended. Avoid digging deeply between blocks without understanding what material should remain.
Will cleaning fix loose or sinking blocks?
No. Cleaning removes surface contamination; it does not rebuild the supporting layers or secure failed edges. Loose, rocking or sunken blocks may need paving repairs. Mention them before booking so the cleaning plan does not get confused with work needed to make the driveway sound.
Does Cleanforce NI include re-sanding with driveway cleaning?
Do not assume it is included. Cleanforce NI provides pressure washing for driveways, patios and paths. Ask when requesting your free written quote whether re-sanding is included, available or needs arranging separately, and have the agreed scope set out clearly.
Can I use the driveway straight after the work?
Ask for advice based on the cleaning method, jointing material and any additional treatment. A surface that looks dry may still have damp joints. Keep access arrangements flexible until you know what stages are planned and what aftercare applies to your paving.
Related services
Covering Tyrone and Fermanagh

