1. Identify the covering before choosing the work
Start with information you already have: building documents, invoices for previous roofing work or a product name recorded during an extension. Photographs taken from the ground can help a contractor understand the roof, but colour alone is unreliable. Concrete can resemble clay, and fibre cement products can resemble natural slate. Do not lift a tile or climb onto the roof simply to settle the question.
Also note whether the whole roof is the same. An older house may have a later extension, a repaired slope or a porch with a different covering. Mention roof windows, solar panels, dormers and any areas where the material changes. These details affect access and the boundaries of the work. If the covering remains uncertain, identification should be resolved before choosing products or deciding how the surface will be treated.
- ✓Look for product details in existing property paperwork.
- ✓Photograph each roof slope from a safe ground-level position.
- ✓Mention extensions, patch repairs and different-looking sections.
- ✓Tell the contractor about any known leaks or loose materials.
2. Concrete tiles: consider the surface as well as the shape
Concrete tiles come in different profiles and finishes, so there is no single appearance that all cleaned concrete roofs should have. An older surface may show weathering, colour variation or exposed aggregate. Cleaning can reveal those existing differences rather than remove them. Ask the contractor to distinguish between material sitting on the tile and changes to the tile's own finish, especially if your main concern is an uneven colour.
The roof's condition matters as much as its material. Cracked tiles, loose ridge details and previous repairs should be identified for appropriate attention, not treated as cleaning marks. Avoid scraping at the surface yourself or experimenting with a household pressure washer. A useful quote explains the intended cleaning approach, the areas included and what appearance is realistic for that particular roof. It should not depend on making weathered concrete look like a new product.
- ✓Mention any coating or previous surface treatment you know about.
- ✓Expect existing weathering to remain visible after cleaning.
- ✓Separate cleaning requests from repairs to tiles and ridge details.
Roof cleaning
- Air-pole roof cleaning
- No walking on tiles
- Free written quotes
3. Clay tiles: respect the finish and existing variation
Clay roofs may have a naturally varied appearance, and some products have a particular glaze or surface finish. That character should inform the cleaning plan. A uniform colour is not always a sensible target, particularly where tiles were made with intentional variation or have weathered differently across the roof. If you know the manufacturer or product range, pass that information on so relevant care guidance can be considered.
From the ground, look for obvious broken pieces, slipped tiles or debris collecting around roof junctions. Do not try to test a tile's strength by standing on it or lifting its edge. Clay coverings can include delicate edges and details that need careful handling. Discuss roof moss removal in terms of the existing covering and its condition, rather than assuming the same tools and force are suitable for every tiled roof.
4. Natural slate: check the whole roof assembly
Natural slate varies in colour, thickness and texture. Those differences are part of the material and may remain quite noticeable after cleaning. On an older roof, the condition of fixings, flashings and individual slates also deserves consideration. A clean surface cannot tell you whether the underlying assembly needs repair. If you have noticed slips, fragments on the ground or water entering indoors, explain those observations before any cleaning is agreed.
Avoid walking on slates or disturbing their overlaps to remove a patch of growth. Cleanforce NI's main air-pole approach works without walking on tiles, but the suitability and scope still need to be considered for the roof in front of the team. Ask how valleys, roof windows and neighbouring surfaces will be treated. The objective is to remove unwanted material appropriately, not to make natural slate resemble a smooth, uniformly coloured manufactured covering.
5. Fibre cement: establish what the product is
Fibre cement deserves particular care with identification. Modern fibre cement slates and older cement-based roofing products should not simply be grouped together because they look alike. Some older materials contain asbestos. If the composition is uncertain, do not scrape, drill, brush, pressure wash or otherwise disturb the covering. Establish what it is and obtain appropriate specialist advice before deciding whether any cleaning work should proceed.
Where the product is identified and suitable for consideration, its manufacturer's care instructions and current condition should guide the discussion. Surface coatings, exposed edges, damaged pieces and previous treatments all matter. Do not assume that a product suitable for concrete tiles is automatically suitable for fibre cement. Tell the contractor about any age information, survey notes or product paperwork you hold, and keep uncertain areas outside the agreed work until they have been properly assessed.
- ✓Treat an unknown older covering as an identification question first.
- ✓Do not take a sample yourself or disturb a suspect material.
- ✓Keep product information available when discussing cleaning.
- ✓Mention cracked pieces and any known previous coating.
6. Match the method to the material and condition
A roof-cleaning plan needs to account for more than the name of the covering. Pitch, access, surface finish, existing defects and nearby materials can all affect the approach. Ask what will be used on the roof and what will be used on adjoining walls or paving. Cleanforce NI uses air-pole roof cleaning as its main service, and also softwashes and pressure washes where and when needed. Those options are not interchangeable instructions for every surface.
Biocide treatment available. Ask whether this is appropriate for the identified covering, how neighbouring areas will be considered and what changes may be gradual rather than immediate. For a fuller comparison of cleaning methods, read air roof cleaning vs pressure washing. For questions about the growth itself, is moss damaging my roof covers that separate topic without relying on the material's appearance alone.
7. Look after gutters, junctions and surrounding surfaces
Roof care includes the places where water and debris collect. Valleys, abutments, gutters and downpipes all deserve attention when the work is being planned. A roof can be relatively clear while the gutter below it is holding leaves and loose material. Cleanforce NI offers gutter cleaning using a vacuum; ask whether that is part of your proposed work or a separate item on the quote.
Make the team aware of conservatories, flat-roofed extensions, delicate planting and neighbouring boundaries. Different surfaces may need different treatment, and access over a lower roof should never be taken for granted. Keep your own preparation simple: move small items, identify awkward access and point out known problems. Leave roof-level inspection, disturbance of coverings and any necessary repairs to people equipped for the particular task.
8. Ask for a material-aware written quote
When requesting a free written quote, give the roof material if known, describe its condition and explain your main concern. Useful questions include what will be removed, which surfaces are included and what existing marks may remain. Ask how access will be arranged without assuming that scaffolding, ladders or poles are automatically suitable in every position. Clear information at the start helps keep the proposed work focused.
Cleanforce NI Ltd, Roof Cleaning Specialists, is based at 31 Brookmount Road, Omagh BT78 5HZ. The areas we cover include Tyrone and Fermanagh, with Omagh, Enniskillen, Cookstown, Dungannon, Strabane and villages, plus Belfast from the Omagh base. Call 07814 733 959, Monday to Saturday, 9am–6pm, to discuss the roof and arrange a free written quote.
Want a professional to handle it?
Frequently asked questions
Can you identify my roof material from a photograph?
A clear photograph can help start the discussion, especially alongside product paperwork. It may not establish the exact material, finish or condition. Similar-looking coverings can need different care, so uncertainty should be resolved before work is agreed.
Will cleaning make all my tiles the same colour?
Not necessarily. Natural variation, weathering, repairs and differences between batches may remain visible. Cleaning removes unwanted material; it does not reverse ageing or turn a mixed roof into a uniform new covering.
Can the same treatment be used on concrete and clay?
It depends on the particular products, finishes and condition. A method should not be chosen solely because both coverings are called tiles. Share any manufacturer information and ask why the proposed approach suits your roof.
What should I do if my fibre cement roof might contain asbestos?
Leave it undisturbed and seek appropriate specialist identification and advice. Do not scrape, drill, brush or pressure wash it, and do not take your own sample. Explain the uncertainty before requesting any cleaning work.
How do I decide when my particular roof needs cleaning?
Material is only one part of that decision. For a separate discussion of timing, shading and the surroundings, see the related guide on how often to clean a roof. Avoid setting a schedule from the covering's name alone.
Related services
Covering Tyrone and Fermanagh

