Not every black mark has the same cause
Lichen is a common explanation for stubborn dark spotting on outdoor paving, but it is not the only one. Marks from metal furniture, barbecue spills, leaf debris and other materials can also remain after ordinary washing. Some stone contains natural variations that look like staining. It is better to describe what you see than assume every dark patch needs the same treatment.
Look at the pattern. Scattered small spots across exposed slabs suggest a different history from a dark ring beneath a pot or marks directly below a metal chair. Notice whether the surface feels raised without scraping it, whether spots cross several slabs and whether the area is usually shaded. These observations help narrow the questions for a contractor. They do not require you to identify the growth or select a chemical yourself.
- ✓Photograph the whole patio as well as the affected slabs.
- ✓Mention furniture, plant pots or cooking equipment previously in that position.
- ✓Note whether the marks remain visible when the paving is dry.
Why ordinary washing can leave spots behind
Loose dirt and firmly attached growth are different cleaning problems. A wash may remove the surface film around a spot without removing the spot itself. Once the surrounding slab looks cleaner, the contrast can make the remaining marks seem worse. That does not automatically mean the original wash failed or that the paving needs more force.
Repeatedly passing over a stubborn area can create a new problem if the surface or joints start to erode. Stop if you notice sand, jointing material or fragments coming away. Dark colour may also remain after growth has been addressed, depending on the cause and the material. Ask what the proposed work is intended to remove and what may remain visible. A clear explanation is more useful than treating every surviving mark as a reason to increase pressure.
Pressure washing
- Driveways, patios and paths
- Method matched to the surface
- Free written quotes
Identify the paving before choosing a product
Concrete slabs, natural stone and porcelain do not share every cleaning requirement. Even within natural stone, finishes and mineral content vary. A product suitable for one surface can damage another, particularly where acidic cleaners meet acid-sensitive stone. If you know the supplier, product name or installation details, keep that information available and check the manufacturer's care guidance.
Do not assume that a bottle described as an outdoor cleaner is suitable for every patio. Read the specific surface restrictions, dilution instructions and precautions before considering use. If the paving is sealed, painted or coated, that adds another compatibility question. Tell the contractor about previous sealers and treatments, even if you do not know exactly what was used. A discreet test may help assess suitability, but it does not replace understanding the material or following the relevant instructions.
- ✓Look for spare slabs, invoices or installation records that identify the paving.
- ✓Mention any sealer, colour enhancer or earlier spot treatment.
- ✓Flag areas that already look rough, pale, flaky or uneven.
Avoid the stronger-and-closer cycle
When a mark resists cleaning, it is tempting to scrub harder, increase the concentration or move the nozzle closer. That cycle can etch a surface, disturb joints or leave a visibly different patch. Damage may only become obvious once the paving dries. Avoid wire brushes and improvised mixtures, and never mix cleaning products together.
Do not use a product intended for another job simply because it is already in the shed. Household bleach, acidic cleaners and other chemicals have different risks and compatibility limits. Keep products away from children and pets, and follow all label requirements for handling and use. If you cannot identify the paving or the stain, pausing is a sensible choice. Our softwash vs pressure wash guide explains the broader methods, but a stubborn spot still needs a surface-specific assessment.
Check the joints, drainage and nearby planting
The slabs are only part of the patio. Loose joints, rocking paving and water collecting against the house need to be mentioned before cleaning is arranged. Washing will not correct a failed jointing system, stabilise a moving slab or repair the fall of a patio. Those issues may need a paving professional, particularly where water is repeatedly collecting in the wrong place.
Look at where cleaning water could travel, including nearby borders, ponds, gullies and shared areas. A drain being nearby does not make every discharge suitable. Discuss runoff management and protection for planting before any product is used. Move light furniture and ornaments if safe, but leave heavy pots for an agreed plan rather than risking injury. Keep children and pets out of the working area and follow the access advice for the chosen method.
- ✓Point out loose or missing joints and slabs that move underfoot.
- ✓Mention puddles, blocked drainage and water collecting near doors.
- ✓Identify ponds, delicate planting and neighbouring areas that need consideration.
Ask what a targeted approach can realistically achieve
A useful assessment considers the type of mark, the paving material, previous cleaning and the condition of the joints. Ask whether the whole area needs attention or whether the remaining spots need a more targeted approach. Request a clear explanation of the likely improvement and any uncertainty. The answer may differ between adjoining areas if the materials or staining histories are different.
Biocide treatment available. Where that option is proposed for growth, ask about suitability for the paving, surrounding protection and the product's access and aftercare requirements. Do not assume it is suitable for every dark mark or that all visible change will happen immediately. Cleanforce NI uses pressure washing and softwashing where and when needed. The aim should be a considered plan for the patio, not repeated aggressive attempts to achieve a result the material cannot safely support.
Review dry paving before deciding what comes next
Wet slabs can hide colour differences, while drying patches can temporarily exaggerate them. Judge the appearance when conditions allow a fair comparison, and ask when the agreed method should be reviewed. Photographs taken from a similar position and in similar light are more helpful than comparing a wet afternoon with a bright, dry morning.
Some marks may remain because they are embedded stains, natural features or evidence of past damage. Cleaning cannot rebuild an eroded surface or make replacement slabs match older paving. If a patch still concerns you, ask for an explanation before applying another product. Sealing is a separate decision, not an automatic answer to residual spotting. It needs to suit the paving and its condition, with appropriate preparation. Avoid sealing over an unresolved problem simply to finish the job quickly.
Keep an eye on recurring conditions and get local advice
Sweep away leaves and soil before they sit on the paving for long periods, keep drainage routes clear where safely accessible and notice areas that stay damp. Consider suitable pot feet or furniture protection where the manufacturers recommend them. These habits can reduce avoidable staining, but they will not make an outdoor patio maintenance-free. A slippery surface needs attention even if the individual spots do not bother you.
Cleanforce NI Ltd, Roof Cleaning Specialists, is based at 31 Brookmount Road, Omagh BT78 5HZ. Check the areas we cover for Tyrone and Fermanagh, including Omagh, Enniskillen, Cookstown, Dungannon, Strabane and villages, plus Belfast from the Omagh base. Call 07814 733 959, Mon–Sat 9am–6pm, for a free written quote. Explain what the paving is, which marks remain and what has already been tried so the discussion starts with useful details.
Want a professional to handle it?
Frequently asked questions
Are all black spots on patio slabs lichen?
No. Lichen is one possible cause, but spills, metal staining, organic debris and natural stone markings can also look dark. The pattern, paving material and history all help with assessment. Avoid buying a specialist treatment solely on the basis of colour.
Should I pressure wash the spots again?
Not automatically. Repeated concentrated washing can damage vulnerable paving or remove jointing material without solving the stain. If the general dirt has gone but spots remain, reassess the cause and surface before using more force. Stop if you see material coming away.
Can every spot be removed completely?
A complete result cannot be assumed. Improvement depends on the mark, the material, previous treatments and any existing damage. Ask what is realistic before agreeing the work, including which marks may remain and whether a test area would help clarify expectations.
Will the spots return after cleaning?
Growth can recur where outdoor conditions remain favourable, and new staining can come from furniture, plants or spills. Sensible maintenance helps, but cleaning does not prevent every future mark. Watch recurring damp areas and ask for aftercare suited to your paving and the method used.
Related services
Covering Tyrone and Fermanagh

