Skip to content
Winter Gutter Special: gutter vacuum, PVC wash and full window clean from £149 See offer →
Serving Tyrone & Fermanagh · Mon–Sat 9–6
Exterior cleaning guide

New build cleaning: planning the outside of your home

Last updated

New build cleaning means dealing with dirt and residues after construction, but an indoor builders’ clean and cleaning the outside of a house are different jobs. Before washing new render, paving or glazing, ask the builder for the material’s care instructions and check who is responsible for any remaining construction marks.

Cleanforce NI’s exterior work includes roof cleaning, softwashing, pressure washing and gutter clearing. We work from Omagh across Tyrone, Fermanagh and Belfast. This guide helps you decide which outside surfaces need attention and what to ask before arranging a free written quote.

Need this sorted?

Need pressure washing? Get a quote from Cleanforce NI.

At a glance

  • Agree handover cleaning and defects with the builder first.
  • Check material care instructions before cleaning new finishes.
  • Separate construction residues from ordinary dirt and biological growth.
  • Ask for each exterior surface and proposed method to be described in writing.
Cleanforce NI van outside a house

Builders’ clean, final clean or exterior cleaning?

The phrase builders’ clean often refers to removing construction dust and residues before a property is handed over. A final or sparkle clean usually describes the finishing clean before occupation. The names alone do not tell you whether outside walls, gutters, windows or paving are included. Ask for a list rather than assuming the whole property is covered.

Read your builder’s handover information and raise unfinished cleaning with them first. Keep that discussion separate from arranging routine exterior care. If your enquiry is about the garden paths or rendered walls, name those areas specifically; an exterior cleaning quote should not be mistaken for an indoor cleaning contract or a building snagging inspection.

Record the condition before anything is washed

Photograph the affected surface in daylight, showing the whole feature and a closer view of the marks. Note whether you are looking at loose mud, paint splashes, mortar residue, a damaged finish or ordinary weathering. Avoid scraping or applying a strong cleaner just to find out what a mark is.

Share existing faults with the builder before cleaning changes the appearance. Cracks, loose pointing, leaking seals and damaged coatings are not cleaning tasks. Keep any product names, installation information and previous attempts to remove marks with your photographs. That record helps the discussion stay focused on what can be cleaned and what needs the installer’s attention.

Pressure washing

  • Driveways, patios and paths
  • Method matched to the surface
  • Free written quotes

New render and painted walls

Fresh render, paint and mortar need care that matches the product and its condition. Do not borrow a drying or curing timetable from a different material. Ask the installer when cleaning is appropriate and which products or methods are permitted, especially where a warranty or specialist finish is involved.

Softwashing uses low pressure and cleaning solutions for suitable surfaces with biological staining. It is not automatically a way to remove every construction splash from new walls. Explain whether the mark is green growth, runoff or building residue. Our softwashing page and render guide explain surface-led cleaning; the choice for a new finish still needs its own assessment.

Paving, driveways and paths after building work

Mud on a finished path is different from cement attached to a slab, and both are different from damaged jointing. Identify whether the area is concrete, block paving, natural stone or another finish. Include the joints and edges in photographs, not just the dirtiest patch. Ask the installer about maintenance requirements before a pressure washer is used.

Pressure washing may suit hard ground surfaces, with the approach adjusted to their condition. It should not be expected to repair sunken paving or remove every embedded stain. For block paving, ask whether joint re-sanding forms part of the quote. The driveway cleaning page explains parking-area considerations, while patio cleaning covers slabs, stone and outdoor sitting areas.

Gutters, roofline and glass need separate decisions

New guttering can still collect leaves or loose debris. If water overflows, describe where it happens and tell the builder about suspected installation defects. Gutter clearing removes obstructions; it does not correct an incorrectly fitted run, failed joint or unsuitable drainage arrangement. Look from the ground rather than climbing to inspect the contents.

Glass, frames and roof panels have their own care requirements. Protective coatings and seals matter, so avoid scraping glazing or treating it like paving. A conservatory enquiry should distinguish roof panels, frames and indoor glass. A newly fitted house roof does not need moss removal simply because exterior cleaning is being arranged elsewhere on the property.

Plan access and the order of work

Agree whether building work and deliveries are finished before arranging cleaning. Continuing work can put fresh dust or mud onto a cleaned area. Tell the cleaner about shared access, parked vehicles, narrow passages, planting and any surfaces the builder has asked you not to disturb. Do not assume scaffolding can be used without an agreed access plan.

Where several exterior tasks are proposed, discuss the order so debris or runoff from an upper surface is not left on freshly cleaned paving. Ask who will move pots and furniture and whether water access is required. There is no single preparation list for every new home; the written scope should reflect the surfaces and surroundings actually involved.

Request a clear exterior quote

Send Phil your town or postcode, ground-level photographs and a description of the outside areas you want assessed. Include the material if known, the builder’s cleaning instructions and any access restrictions. Say whether the concern is construction residue, algae, blocked gutters or general dirt so the proposed work addresses the right problem.

Cleanforce NI provides free written quotes from its Omagh base for work across Tyrone, Fermanagh and Belfast. Each surface needs an appropriate approach rather than a promise that everything will be treated the same way. Use the areas we cover page for local coverage and the contact page to discuss the exterior work you need.

Want a professional to handle it?

Request a free written quote

Free written quotes · Mon–Sat 9–6. Name and phone are required. We only use your details to reply to your enquiry — see our privacy notice.

Frequently asked questions

Does a builders’ clean include the outside of the house?

Not automatically. Check the agreed scope with your builder or cleaning contractor; walls, gutters, paving and exterior glazing may be separate tasks.

Can new render be pressure washed straight away?

Do not assume it can. Ask the installer for the finish’s care instructions and when cleaning is appropriate; the material and condition determine the method.

Will exterior cleaning repair building defects?

No. Cracks, loose joints, leaks and damaged finishes need a separate discussion with the builder or appropriate trade.

Does every new roof need cleaning?

No. Assess what is actually on the surface and discuss any construction residue with the builder rather than booking moss removal by default.

Where can I ask Cleanforce about exterior cleaning?

Cleanforce NI is based in Omagh and serves Tyrone, Fermanagh and Belfast. Send your location, photographs and the outside surfaces you want assessed for a free written quote.

Related services

Covering Tyrone and Fermanagh